Esoteric Grandioso T1 Analog Turntable

This turntable – with 10MHz Clock Sync capability for the motor drive unit and 3-piece independent chassis configuration – is the culmination of Esoteric’s unique design philosophy and mechanical/electronic technology.

• Esoteric’s patented contact-free drive system “Esoteric MagneDrive System”
• Magne-Float platter greatly reduces spindle bearing friction by reducing the platter’s effective mass from 19kg down to approx. 4kg.
• Consists of 3 separate units: the main unit, the motor unit, and the power supply unit.
• A high-quality VCXO motor driver ensures precise platter rotation.
• 10MHz Clock Sync capability with the Grandioso G1X Master Clock.
• The inverted bearing system supports the smooth rotation of the platter.
• The Micrometer knob on the front panel provides fine-tuning capability of sonic characteristics, by adjusting the strength of magnetic force being applied from the magnetic driver to the platter.
• A triple-layer chassis made of Aluminum and wood effectively controls vibration.
• The mid-chassis is applied with beautiful high-gross piano lacquer.
• The isolation feet have a special damping mechanism that eliminates external vibration.
• Two-speed control (33/45 rpm), adjustable with 0.1% order.
• The T1 is offered with TA-9D dynamic balance tonearm, or without tonearm configuration.
• Optional arm-board allows the T1 to accommodate up to 3 tonearms.

Spec description

Turntable section:

Rotation speed- 33 1/3 rpm, 45 rpm

Rotation speed adjustment range- ±12% (0.1% step)

Wow and flutters- 0.06% or less (W.R.M.S)

Clock input:

Connector- BNC x1

Input impedance- 50Ω

Input frequency- 10MHz (±10ppm)

Input level- 0.5 to 1.0Vrms (sine wave)

Toen arm section (TA-9D):

Type- Dynamic balance

Overall length- 326mm

Effective length- 245mm

Distance between tonearm atiz to spindle- 230mm

Overhang- 15±2mm

Tracking error- +2°to 1° 21'

Needle pressure range- 0 to 5g (0.25g step)

VTA elevation range- 0 to 10mm

Cartridge/shell balance range- 6 to 38.5g

Headshell weight- 16.45g

General:

Power

Weight- AC 120V, 60Hz

Weight- AC 220-240, 50Hz

Power consumption- 8W (standby 0.4W)

Base unit

Overall dimensions- 497 x 215 x 436mm / 19.6" x 8.5" x 17.2" (including protrustions)

Weight- 17kg/37.5 lb.

Platter

Overall dimensions (Diameter x Height)- ø315.4 x 103mm / ø12.4" x 4.1"

Weight- 19kg/41.9 lb.

Motor unit

Overall dimensions (WxHxD)- 180 x 137 x 450mm / 7.1" x 5.4" x 17.7" (including protrusions)

Weight- 9kg/19.9 lb.

Power supply unit

Overall dimensions (WxHxD)- 445 x 131 x 370mm / 17.5" x 5.2" x 14.6" (including protrusions)

Weight- 18kg/39.7 lb.

Included accessories- 

Installing tools

Spacer block x1

Height check gauge x1

Install guide rail (L) x1

Install guide rail (R) x1

Main unit protection cover x1

Turntable sheet x1

DC power cord x1

Power cord x1

Felt mats (for power supply unit) 

Handles x2

Owner's manual x1

Tonearm TA-9D x1 (not available on the tone armless model)

Owner's manual for TA-9D x1 (not available on the tone armless model)

Arm base x1 (not available on the tone armless model)