Sigma Series cables showcase technological innovation and design execution that simply does not exist elsewhere — at any price.

Sigma Series cables combine meaningful parts innovations with objective measurement and an artisan’s eye for construction quality. Unlike many cost-no-object cable products that have little in the way of discernible science, Sigma Series products incorporate an array of definable technologies that sets the standard for quality and performance in the cable industry. Sigma digital cables feature Shunyata Research’s exclusive patent-pending TAP Polarizer technology. TAP reduces electromagnetic polarization distortion. Ohno Continuous Cast Copper and PMZ conductors with exotic fluorocarbon dielectrics make for a true reference-quality digital cable. The standard length of the cable is 1 meter. High-speed digital transmission is very different from audio frequency signal transmission and requires a different knowledge base and design criteria. Audio cable signal transmission is governed by the principles of inductance, capacitance, and resistance. By contrast, high-speed digital signals are governed by a principle known as ‘transmission line theory. The performance of a transmission line is governed by the characteristic impedance of the cable. Certain types of cable require a specific characteristic impedance to achieve optimal performance — for instance, cable TV coaxial cables are 75 ohms, while test equipment cables require 50-ohm cables. Modern audio and entertainment systems may have multiple digital connections, each with potentially different characteristic impedances. While the characteristic impedance is a critical factor in the optimal performance of digital cables, our research also indicates that the precision with which a digital cable is constructed has a significant impact on its performance. Shunyata Research digital cables are produced using a Precision Matched Z concept. This dictates that tolerances of the conductor surface, dielectric extrusion, and the precision of the braided shield are held to smaller variances. To achieve these tight tolerances, the extrusion and braiding machines must be run at one-quarter speed during the manufacturing process. The result is better performance through a reduction of cable-induced ‘signal jitter. ~ Patents Pending ~