FOR ORDER STATUS, PLEASE CALL 941-404-1099
Shop By Category
We love answering questions. Talk to an expert now.
on all e-commerce orders over $100
Always Included
Stereo output is rated at 120W per channel into eight ohms and 210W per channel into four ohms, achieving up to 840W per channel into one ohm instantaneously. There is also a user-selectable mono mode with a rated output of 420W into eight ohms. In order to achieve this level of power without sonic compromise, Luxman has implemented its ODNF 4.0 drive circuit utilizing a four-parallel push-pull structure with three-stage Darlington. A Luxman ‘Ultimate Efficiency Power Transformer’ – an EI type rated at 550VA – forms the heart of the amp’s power supply, with plentiful regulation ensuring an unshakable response to any load fluctuations. A high-capacity block capacitor contributes to the M-700U’s ability to deliver lashings of power instantaneously yet remain firmly in control, while the amp’s low-impedance transmission design, carefully selected custom components and short, fully optimized signal paths deliver maximum sonic purity. In classic Luxman style, the M-700u sports two illuminated VU meters, one for each channel, giving a real-time indication of signal level that’s both a satisfying visual accompaniment to the music and a useful guide to how hard the amp is being pushed. Around the back are both single-ended RCA and balanced XLR inputs, heavy-duty speaker binding posts, switches for stereo/mono modes and phase inversion, plus a remote input terminal for custom installations.
Rated output | 120W + 120W (8Ω)/at stereo 210W + 210W (4Ω)/at stereo 420W (8Ω)/at monaural |
---|---|
Instantaneous max. output | 840W + 840W (1Ω)/at stereo 1,680W (2Ω)/at monaural |
Input sensitivity | 1.1V/120W (8Ω) GAIN 29.0dB |
Input impedance | Unbalanced 51kΩ Balanced 34kΩ |
Frequency response | 20Hz to 20kHz (+0, –0.1dB) 1Hz to 130kHz (+0, –3.0 dB) |
Total harmonic distortion rate | 0.009% or less (1kHz/8Ω) 0.1% or less (20Hz to 20kHz/8Ω) |
S/N ratio (IHF-A) | 115dB |
Amplification circuit | ODNF 4.0 |
Output configuration | Bipolar 4-parallel push-pull |
---|---|
Power transformer | EI type 550VA |
Damping factor | 350 |
Power consumption | 370W 110W (under no signal) 0.4W (at standby) |
External dimensions | 440(W) x 190(H) x 427(D) mm front side knob of 2mm and rear side terminal of 38 mm included in depth |
Net weight | 27.5kg |
Accessories | Dedicated remote cable Power cable |
Speaker terminal Supported Y-lug terminal dimension | Width of part a: 14mm or less Width of part b: 7mm or more * Connection may not be performed depending on the shape of the Y-lug terminal. |