Taking rest, while the preamplifier is overtaking control of every detail needed, is the only thing you have to do.
The Line-Block is adding the desired level and settings to the signal while the electricity needed is conveyed by the Power-Block that runs on batteries and allows you to enjoy the ultimate sound quality for at least 15 hours. After that, the recharge mode is set automatically and the Power-Block works as an energy reservoir.
So you can stay hungry for the sound while your power amplifiers are being fed. Moreover, the Line-Block also guards the temperature of the Mono-Blocks through the communication channel.* And you? You can still continue listening to your favorite records on and on.
*works only together with appropriate BLOCK AUDIO Power Amplifier
|Distortion:||THD+N <0.0005 %, IMD <0.0007 % (at 6 Vrms out)|
|Frequency Response:||DC – 300 kHz -0.5 dB, DC – 20 kHz -0.01 dB|
|Signal/Noise Ratio:||>130 dB A-weighted, >128 dB unweighted (related to full output)|
|Channel Separation:||Infinite (>130 dB)|
|Max. Voltage Gain:||+12 dB balanced, +18 dB unbalanced|
|Input Impedance:||40 kΩ balanced, 20 kΩ unbalanced|
|Output Impedance:||50 Ω balanced, 25 Ω unbalanced|
|Maximum Output Voltage:||20 Vrms balanced, 10 Vrms unbalanced|
|Inputs:||4 balanced (XLR) pairs, 5 unbalanced (RCA) pairs|
|Phono Input:||1 unbalanced (RCA) pair|
|Outputs:||2 balanced (XLR) pairs, 2 unbalanced (RCA) pairs|
|Phones Output:||3 pole XLR receptacle and 6.35 mm / 1⁄4″ stereo jack|
|Battery Operation Time:||>15 hours|
|System Remote Control:||Yes*, Neutrik RJ45|
|Power Consumption:||150 W max. at charging, 50 W at idle, <0.5 W in Standby|
|Mains Voltage:||230 / 115 V AC ±10 %, 50 / 60 Hz (factory pre-configured)|
|Dimensions – Line:||460/18.1(w) × 105/4.1(h) × 360/14.2(d) mm/inch|
|Dimensions – Power:||460/18.1(w) × 105/4.1(h) × 360/14.2(d) mm/inch|
|Weight in total:||28 kg / 62 lbs., ~40 kg / 88 lbs. shipping|